BWA-X - ROMBUS Pack

BlackWolf Aerospace eXperimental - ROMBUS

Kerbal Space Program Mod by Lupinarius

This mod works with KSP 1.0x to 1.1.3


BWA-X - ROMBUS

 

Curse Forge: http://kerbal.curseforge.com/projects/bwa-x-rombus-pack

Spacedock: http://spacedock.info/mod/743/BWA-X - ROMBUS

License: CC-BY-SA-4.0 (http://creativecommons.org/licenses/by-sa/4.0/)

 

This is my first Mod for KSP and is still changing, but it is primarily stable and has been tested for playability.


This Mod contains the following parts:

* three custom pressurized toroidal LFO tanks
* two fun "Cube" tanks not associated with the ROMBUS
* one large and one small high temperature parachute.
* two adapter Service Module tanks, 2.50m to 3.75m and 1.25m to 2.50m
* two "Size 3" 36 port Truncated Aerospike engines, one each in LFO and Hydrolox with a 6:1 Fuel/Oxidizer Ratio (See Historical Note Below)
* three different length "Size 3" LFO tanks, and three in Hydrolox, with 6:1 Ratio to match the engines
* two decoupling, radially attached cryogenic tanks containing a 6:1 LH2/LOx mix by default


 

This Mod requires and includes the following dependencies:

Module Manager

Website: http://forum.kerbalspaceprogram.com/threads/55219

Source Code: https://github.com/sarbian/ModuleManager

License: CC BY-SA 4.0 (http://creativecommons.org/licenses/by-sa/4.0/)

 

Community Resource Pack

Website: http://forum.kerbalspaceprogram.com/index.php?/topic/83007-11-community-resource-pack-050-hydrates-and-gypsum/

Source Code: https://github.com/BobPalmer/CommunityResourcePack

License: CC BY-NC-SA 4.0 (http://creativecommons.org/licenses/by-nc-sa/4.0/)

 

This Mod recommends the following mods:

Crossfeed Enabler (Pre KSP 1.05 Only)

Website: http://forum.kerbalspaceprogram.com/index.php?/topic/69286-10-crossfeedenabler-v33-may-11/

Source Code: https://github.com/NathanKell/CrossFeedEnabler/

License: CC BY-SA 4.0 (http://creativecommons.org/licenses/by-sa/4.0/)

 

Modular Fuel Tanks

Website: http://forum.kerbalspaceprogram.com/threads/64117

Source Code: https://github.com/NathanKell/ModularFuelSystem

License: CC BY-SA 4.0 (http://creativecommons.org/licenses/by-sa/4.0/)

 

I have created two separate module configuration files for MFT which are located in the Modules
subfolder and they are called, "BWAX_modularFuelTanks.cfg" and "BWAX_TankTypes.cfg"


 

Historical Note

Background

When I first decided to take up modding KSP I found a very interesting, although unfinished
tutorial about how to create parts in Blender/Unity. Just like the creator of the video
(YouTube handle is TechyBen) I was interested by the unusual shapes of the tanks in the
tutorial. I was actually so intrigued by them that I decided that I must find out what
spacecraft they were from, and that I must make something like it to share with others
in KSP. It took me a while but I did finally find out what proposed space vessel those
fascinating tanks belonged to, and have also created the basic parts to make a vehicle
similar to it's small first run version. It was the ROMBUS vehicle.

 

THE ROMBUS

Phil Bono of Douglas Space and Missiles Company (later McDonnell Douglas), designed the ROMBUS
vehicle in the 1960's as part of what would become the Douglas Saturn Application Single Stage
To Orbit or SASSTO vehicle concept. This vehicle was designed at the same time as the NEXUS
booster and first ORION concepts. It had a much larger military based variant called ITHACUS and
the PEGASUS was to be a civilian point to point sub-orbital model. this later spawned the HYPERION
which later contributed to the PHOENIX B and it's developments eventually went into the very cool
DELTA CLIPPER Project. A PDF about the history of the PHOENIX VTOL SSTO which includes some
background about the ROMBUS and the Douglas SASSTO should be available at:

http://www.1000planets.com/papers/phoenix-history.pdf

 

FUTURE DEVELOPMENT

If you can provide me with advice on any of these, or simply wish to give constructive feedback I am very happy to hear it!

 

1. Add animated covered parachute hatches to the top of the radial fuel tanks, so they can be used as a habitat when empty, like the original design.

 

2. Add limited emissive animation to the thrust ports on the engine, while maintaining the heat-shield animation ability.

 

3. Add texture switching and/or tank switching options via Firespitter or Interstellar Fuel Switch.


Comments

Posts Quoted:
Reply
Clear All Quotes

About This Project

  • Project ID
    245788
  • Created
    Jun 3, 2016
  • Last Released File
    Jun 4, 2016
  • Total Downloads
    680
  • License

Categories

Members

Recent Files